Cabletron Systems CSX1000 - Manual (Page 47)

Workgroup Remote Access Switch 47
H ARDWARE O VERVIEW
System Platforms
A DMINISTRATION C ONSOLE A CCESS
The Console connector is an RS232 connector which provides dedicated asynchronous connection.
This async connection is available for administration console management or PPP-Async data
transfer. The internal RS232 interface is preconfigured for DTE, providing a male 9-pin port
connector for the administration console hook-up. The default baud rate is 9600.
For informational purposes, the pin list for the console follows:
Pin and Signal Assignment for the RS232 Connector(s)
Pin Signal Function
1 CD Carrier Detect
2 RXD Receive Data
3 TXD Transmit Data
4 DTR Data Terminal Ready
5 GND Ground
6 DSR Data Set Ready
7 RTS Request to Send
8 CTS Clear to Send
9 RI Ring Indicator