Cabletron Systems CSX1000 - Manual (Page 568)

USER’S GUIDE
568 CyberSWITCH
C OMPRESSION S TATISTICS
The system collects the following compression statistics for each active compression connection.
These statistics can be displayed by issuing the
cmp stats or the cmp stats <device name>
command at the administration console. The cmp stats command will display the compression
statistics for all active connections. The cmp stats <device name> command will display the
compression statistics for the specified device. Note that the device name is case sensitive.
Note: When using PPP, it is possible that CCP can open with no agreed upon compression
algorithm in one or both directions. In such cases, the connection is considered to be
running with compression, and will consequently be picked up by the CMP command.
However, the ratios and counters for the direction(s) without an actual compression
algorithm negotiated will not indicate any effective compression or decompression.
C OMPRESSION R ELATED S TATISTICS
cmp ratio
The number of uncompressed bytes divided by the number of compressed bytes.
uncmp Kbytes
The total number of uncompressed kilobytes received.
cmp Kbytes
The total number of compressed kilobytes sent.
total cmp reset count
The total number of compression resets (peer and System sent resets).
peer sent resets
The number of compression resets sent from peer devices.
system sent resets
The number of decompression resets sent from the System.
dropped pkts
The number of dropped packets that could not be queued.
D ECOMPRESSION R ELATED S TATISTICS
dmp ratio
The number of decompressed bytes divided by the number of compressed bytes.
dmp Kbytes
The total number of decompressed kilobytes sent.
cmp Kbytes
The total number of compressed kilobytes sent.