Cabletron Systems CSX1000 - Manual (Page 81)

Workgroup Remote Access Switch 81
U PGRADING S YSTEM S OFTWARE
Return Configuration to Factory Defaults
3. Change the admin and guest system passwords.
If your system was previously accessed by your distributor, the preconfigured password will
be admin (in lower case). Change this password to secure your system. To make this change,
enter the following command at the system prompt:
pswd
Then follow the prompts to enter a new password. Your password must be a 3 to 16 nonblank
character string. Be careful, passwords are uppercase and lowercase sensitive.
R ETURN C ONFIGURATION TO F ACTORY D EFAULTS
The default configuration files are located on the CSX1200 CD. If you wish to return to the
default configuration, download the
DEFLTCFG.OSW file. Follow the same steps for Local or
Remote Upgrade except download the file DEFLTCFG.OSW instead of the UPGRADE.OSW file.
A CCESSING THE R ELEASE N OTES
The Release Notes provide release highlights and important information related to this release that
should be reviewed before you begin the system’s installation and configuration.
The Release Notes are located on CD as well as on the system’s FLASH file system.
The Release Notes on CD are located in the REL_NOTE.TXT file. This file is a DOS text file you can
read on a DOS machine. Insert the CD into the drive, change to the proper directory, and enter the
following command at the DOS prompt:
[CD-ROM drive]:\[platform directory][ISDN standard directory][option directory]> type
REL_NOTE.TXT | more
For example, if your CD-ROM is designated as drive D, you are installing a CSX1204, using US
ISDN standards and the IP/IPX option, you would use the following path:
D:\CSX1204\US\IPIPX> type REL_NOTE.TXT | more