Comtech EF Data DT-4500-A Series - Manual (Page 100)

DT-4500-A Series Downconverters Revision 1
Ethernet-based Remote Product Management MN-DT4500A
6–14
6.4.5.2.2 Admin | SNMP
The Administrator must use this page to manage the 45xxA SNMP (Simple Network
Management Protocol) settings.
Figure 6-5. Admin | SNMP page
Click [Refresh] to update the page with its latest operating parameters.
SNMP
• Simple Network Management Operational Status: Use the drop-down list to select the
Simple Network Management operational setting as Enabled or Disabled.
• The SNMP Read and Write Community String fields can be any combination of characters
and a length of 0 - 20 characters:
o The factory default for the Read Community String parameter is public.
o The factory default Write Community String is private.
• Enable Authentication Trap: Use the drop-down list to select the Enable Authentication
Trap operational setting as Enabled or Disabled.
• The Administrator can assign up to two SNMP Trap IP addresses and one SNMP Trap
Community String. The SNMP Trap Community String field can be any combination of
characters and a length of 0 - 20 characters:
o The factory default for the Trap Community String is comtech.
• Trap Version: Use the drop-down list to select the SNMP Trap Version as SNMPv1 or
SNMPv2c.
See Sect. 6.3 SNMP INTERFACE for details pertaining to the remaining configuration parameters
available on this page,