A.7.2.10 clear preset configuration, A.7.2.11 select preset configuration – Comtech EF Data DT-4500-A Series User Manual
Page 128
Advertising
DT-4500-A Series Downconverters
Revision 1
Appendix A
MN-DT4500A
A–18
A.7.2.10 Clear Preset Configuration
Use this command to clear a single preset value.
Command
Details
Clear a Preset:
<DEV/CLR_nn'cr'
Confirmation:
>DEV/CLR_nn_Cleared'cr''lf']
Note: nn = Preset Number = 01 to 32.
A.7.2.11 Select Preset Configuration
Use this command to configure the converter to the frequency and attenuation data assigned to
a given preset number.
Command
Details
Select Preset:
<DEV/SEL_nn'cr'
Confirmation:
>DEV/SEL_nn_Selected'cr''lf']
Note: nn = Preset Number = 01 to 32.
Only programmed preset numbers are available.
Advertising
This manual is related to the following products: