Comtech EF Data DT-4500-A Series - Manual (Page 117)

DT-4500-A Series Downconverters Revision 1
Appendix A MN-DT4500A
A–7
A.7 Command / Response Pairs
A.7.1 Utility Commands
A.7.1.1 Time
Command Details
Set Time: <DEV/TIM_hh:mm:ss'cr'
Where:
hh=Hour
mm=Minutes
ss=Seconds
Confirmation: >DEV/TIM_hh:mm:ss'cr''lf']
Retrieve Time: <DEV/TIM_'cr'
Confirmation: >DEV/TIM_hh:mm:ss'cr''lf']
A.7.1.2 Date
Command Details
Set Date: <DEV/DAT_mm/dd/yy'cr’
Where:
mm=Month
dd=Day
yy=Year
Confirmation: >DEV/DAT_mm/dd/yy'cr'lf']
Retrieve Date: <DEV/DAT_'cr'
Confirmation: >DEV/DAT_mm/dd/yy'cr''lf']
A.7.1.3 Time Protocol Enable
Use the TPE command to enable or disable the time protocol.
Command Details
Set Time Protocol: <DEV/TPE_x'cr’
Where:
x=
0 Time protocol disabled
1 Time protocol enabled
Confirmation: >DEV/TPE_x'cr'lf']
Retrieve TPE: <DEV/TPE_'cr'
Confirmation: >DEV/TPE_x'cr''lf']