2 snmp community strings, 3 snmp traps – Comtech EF Data DT-4500-A Series User Manual
Page 89
DT-4500-A Series Downconverters
Revision 1
Ethernet-based Remote Product Management
MN-DT4500A
6–3
The following MIB files are associated with the DT-4500-A:
MIB File/Name
(where ‘x’ is the
revision letter)
Description
FW-0000235x.mib
ComtechEFData
Root MIB file
ComtechEFData MIB file gives the root tree for ALL Comtech EF Data products and
consists of only the following OID:
Name: comtechEFData
Type: MODULE-IDENTITY
OID: 1.3.6.1.4.1.6247
Full path:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtechEFData(6247)
Module: ComtechEFData
FW-0020205x.mib
DT-4500-A MIB file
MIB file consisting of all OID’s for management of the downconverter functions
FW-0020206x.mib
DT-4500-A Traps
MIB file
Trap MIB file for SNMPv1 traps common for DT-4500-A.
6.2.2 SNMP Community Strings
In SNMP v1/v2c, the SNMP Community String is sent unencrypted in the SNMP
packets. Caution must be taken by the network administrator to ensure that SNMP
packets travel only over a secure and private network if security is a concern.
The DT-4500-A uses Community Strings as a password scheme that provides authentication
before gaining access to the DT-4500-A agent’s MIBs. They are used to authenticate users and
determine access privileges to the SNMP agent.
Type the SNMP Community String into the user-supplied MIB Browser or Network Node
Management software. You may define three Community Strings for SNMP access:
•
Read Community
default = public
•
Write Community
default = private
•
Trap Community
default = comtech
For proper SNMP operation, the DT-4500-A MIB files must be used with the
associated version of the DT-4500-A Series Downconverter M&C. Refer to the DT-
4500-A FW Release Notes for information on the required FW/SW compatibility.
6.2.3 SNMP Traps
The DT-4500-A supports both SNMPv1 traps and SNMPv2 notifications. The DT-4500-A has the
ability to send out SNMP traps when certain faults occur in the unit. A trap is sent both when a