Comtech EF Data DT-4500-A Series User Manual
Page 67
Advertising
DT-4500-A Series Downconverters
Revision 1
Updating Firmware
MN-DT4500A
4–5
Step Task
6
Change the desired image to boot.
From the DT-4500-A front panel menu: UTILITY FIRMWARE SELECT.
Use the
◄ ► arrow keys to change to the other image, then cycle power to reboot the
unit.
7
Verify the new firmware version has booted by observing the firmware version displayed
on the DT-4500-A front panel, for example:
DT_4503C-2
SW VER #.#.# SN#########
Note: To load the second image, repeat Steps 3 through 6
The DT-4500-A is now operating with its latest firmware. The firmware update process is now
complete.
Advertising
This manual is related to the following products: