Comtech EF Data DT-4500-A Series - Manual (Page 123)

DT-4500-A Series Downconverters Revision 1
Appendix A MN-DT4500A
A–13
A.7.1.21 Firmware Information
This command returns information about the firmware loaded in the unit including firmware
numbers, versions, and release dates. This command replaces the legacy FRW command.
Command Details
Retrieve Firmware Information: <DEV/FRM_’cr’
Confirmation: >DEV/FRM_’cr’
Boot: ’cr’
FW-AAAAAAA B.B.BB DD/MM/YY’cr’
Bulk1: ’cr’
FW-AAAAAAA B.B.BB DD/MM/YY’cr’
FW-AAAAAAA B.B.BB DD/MM/YY’cr’
FW-AAAAAAA B.B.BB DD/MM/YY’cr’
Bulk2: ’cr’
FW-AAAAAAA B.B.BB DD/MM/YY’cr’
FW-AAAAAAA B.B.BB DD/MM/YY’cr’
FW-AAAAAAA B.B.BB DD/MM/YY’cr’’lf’]
Where:
FW-AAAAAAA = the firmware part number
B.B.BB = the version number
DD/MM/YY = Day/Month/Year firmware released
A.7.1.22 Firmware Image
This command allows a valid bulk image to be selected as the next active image during boot-up.
Command Details
Set Next FW Image: <DEV/IMG_x'cr' x = 1 to 2
Confirmation: >DEV/IMG_x'cr''lf']
Retrieve Active FW Image: <DEV/IMG_'cr'
Confirmation: >DEV/IMG_x'cr''lf']