5 config | redundancy – Comtech EF Data DT-4500-A Series User Manual
Page 107
Advertising
DT-4500-A Series Downconverters
Revision 1
Ethernet-based Remote Product Management
MN-DT4500A
6–21
6.4.5.3.5 Config | Redundancy
See
Appendix B. REDUNDANT SYSTEM OPERATION for the functional
description of this page.
Use this page to configure the DT-4500-A’s Redundancy Switch Mode.
Figure 6-10. Config | Redundancy page
(Top) Page with Redundancy Mode OFF
(Bottom) Page with Redundancy Mode ON
Click [Refresh] to update the page with its latest operating parameters.
Advertising
This manual is related to the following products: