Comtech EF Data DT-4500-A Series User Manual
Page 153
DT-4500-A Series Downconverters
Revision 0
Appendix B
MN-DT4500A
B–13
B.4.2 Redundant System Configuration using the 45xxA Web Server
Interface
Chapter 6. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT
Monitoring and configuration of redundancy operations is possible using the 45xxA Web Server
Interface. Click the Config tab, and then select the Redundancy hyperlink to continue.
Figure B-14. Config | Redundancy page
Click [Refresh] to update the page with its latest operating parameters.
Online Status
This read-only section identifies the unit’s status as ONLINE or OFFLINE.
Redundancy Mode
Use the drop-down list to select Redundancy Mode as OFF or ON, and then click [Change].
Chain Position
Use the drop-down list to assign the unit’s Chain Position as the Backup Unit, or Unit 01 through
Unit 12.