Hypertherm Powermax65 Service Manual Rev.1 - Manual (Page 129)

TroubleshooTing and sysTem TesTs
powermax
65/85 Service Manual 5-3
Fault LED
(yellow)
Power ON LED
(green)
Status screen
Automatic/manual pressure
setting mode selector
Current/gas
selector
Operating
mode switch Adjustment knob
Controls and indicators
The Powermax65 and Powermax85 controls and indicators are described in Section 4, Operation. These figures are
included for reference.
ON (I)/OFF (O) power switch
Activates the power supply and its control circuits.
Torch started
Fault icon
Fault code
Arc is
transferred
Remote
connected
Current
setting
(amps)
Current selection cursor
Pressure selection cursor
Pressure
setting
Visual pressure
setting