Hypertherm Powermax65 Service Manual Rev.1 - Manual (Page 70)

Torch SeTup
3-22
powermax
65/85 Service Manual
Connecting the torch lead
The Powermax65 and Powermax85 are equipped with FastConnect TM , a quick-disconnect system for connecting and
disconnecting handheld and machine torch leads. When connecting or disconnecting a torch, first turn OFF the system.
To connect either torch, push the connector into the receptacle on the front of the power supply.
To remove the torch, press the red button on the connector and pull the connector out of the receptacle.
Red button