Hypertherm Powermax65 Service Manual Rev.1 - Manual (Page 215)

Component ReplaCement
powermax
65/85 Service Manual 6-33
85A CE
2
3
3
3
1
When securing a component to the heat sink, gently tighten all screws and then tighten all screws to the required
torque.
Note: All screws listed are Phillips head, pan head, machine screws.
Torque to 15 in-lbs (17.3 kg cm).
M4 X 10 2SEM
Torque to 20 in-lbs (23 kg cm).
M5 X 16 2SEM
Torque to 35 in-lbs (40 kg cm).
M6 X 16-12.5 2SEM TRI CHRM
1
2
3
Note: “3” on the left