Hypertherm Powermax65 Service Manual Rev.1 - Manual (Page 19)

SpecificationS
powermax
65/85 Service Manual 1-3
Where to find information
System specifications such as size, weight, detailed electrical specifications, and cut speeds can be found in this
section. For information on:
• Setup requirements, including power requirements, grounding, power cord configurations, extension cord
requirements, and generator recommendations – see Section 2, Power Supply Setup.
• Handheld and machine torch consumables, cut charts, and torch setup information – see Section 3, Torch
Setup.
• Information about the controls and LEDs, steps for system operation, and hints for improving cut quality – see
Section 4, Operation.
• Maintenance and repair – see the troubleshooting section.
• Replacing components – see the Component replacement section (Service Manual).
• Part numbers and ordering information for accessories, consumables, and replacement parts – see the Parts
section.
• Timing and schematic diagrams – see the Wiring diagrams section (Service Manual).