Replace the component barrier – Hypertherm Powermax30 AIR Service Manual User Manual
Page 100
Advertising
![background image](/files/789818/content/doc100.png)
100
Powermax30 AIR Service Manual 808850
6 – Power Supply Component Replacement
Replace the component barrier
Remove the component barrier
1. Set the power switch to OFF (O), and disconnect the power cord from the power source.
2. Remove the power supply cover. See Remove the power supply cover on page 98.
3. Remove the component barrier from the power board side of the power supply. The barrier is flexible and can be bent
slightly for removal.
Figure 24
Kit number
Description
Advertising
This manual is related to the following products: