Replace the front panel – Hypertherm Powermax30 AIR Service Manual User Manual

Page 166

Advertising
background image

166

Powermax30 AIR Service Manual 808850

6 – Power Supply Component Replacement

Replace the front panel

Remove the front panel

Use the following procedure to completely remove the front panel in order to replace it. If you just need to move the front
panel out of the way to provide better access to the interior of the power supply, see

Detach the front panel on page 102

and

Reattach the front panel on page 103.

1. Complete the following procedures:

a. Set the power switch to OFF (O), and disconnect the power cord from the power source.

b. See Remove the power supply cover on page 98.

c. See Remove the component barrier on page 100.

2. Lay the power supply on its side.

3. Remove the retaining screw

from the bottom of the front panel

.

Figure 77

Kit number

Description

428389

Kit: Front panel (does not include current adjustment knob)

1

2

1

2

Advertising
This manual is related to the following products: