Niveo Professional NNAS-R4 - Manual (Page 47)

NAS System
User Manual 47
3.1.2.1 Join a Disk to Storage Pool
Steps to Join a Disk to Storage Pool:
1. Click “Join Disk”.
2. A dialog box will be displayed. Select a RAID logical disk (an unused/newly created
RAID disk) to be joined to the Storage Pool of NASVG. Click “OK” when done.
NOTE: If a new RAID logical disk has not been created yet, create first
the RAID disk using the available free physical disk drives.
3. The RAID logical disk will be joined to the NASVG.
NOTE: An un-used physical disk drive can be used to join to the
Storage Pool of NASVG but it is not recommended because the
physical disk drive does not have RAID Level nor provide data
redundancy. Select only a RAID logical disk to add into the Storage
Pool for better data security.