Niveo Professional NNAS-R4 - Manual (Page 95)

NAS System
User Manual 95
PDC/ADS Mode – Select the mode type of the domain server. This can be
“ADS Windows 2000/2003 Server)” or “PDC (Windows NT Server)”.
Enable NTLMv2 Authentication – This parameter determines whether or
not smbclient will attempt to authenticate itself using the NTLMv2
encrypted password. If enabled, NAS will only sent NTLMv2 and LMv2
responses. NTLMv2 authentication protocol is available only on
WindowsNT4 with SP4 and Windows 2000 or later. Default is disabled.
Enable Client Channel - This controls whether the client offers or even
demands the use of the netlogon schannel. Default is auto, means it
offers the schannel but does not enforce it.
Reset – Use this button to undo or clear any changes made.
Save – Use this button to save the changes made.
5. Click “Save” when done.
NOTE: When NAS is successfully joined to the Windows domain, the
domain user accounts will appear in Account list.
NOTE: The NAS cannot be joined to the Windows domain if NASVG
does not exist (NASVG is not yet initialized).