Niveo Professional NNAS-R4 - Manual (Page 51)

NAS System
User Manual 51
3.1.2.5 Setup Volume as iSCSI Target
Steps to Setup Volume as iSCSI Target:
1. Click the “iSCSI” button of the Volume to be setup.
2. A dialog box will be displayed. Tick the “iSCSI Enable” option to enable iSCSI
function. Enter the Target name. To enable authentication, tick the “Enable” box in
Authentication then enter an Account name. Enter the password in Password box and
Password Confirm box. To enable iSCSI MPIO, set Max Connection to 2. Click “OK”
when done.
NOTE: When Authentication is used, the same Account and Password
must also be used in iSCSI initiator to successfully connect to the NAS
iSCSI target device. Password length must be 12 to 16 characters.
NOTE: By default, the iSCSI Volume (LUN) write cache option is
disabled. To enable write cache on iSCSI target LUN, tick the “Enable
Write Cache” option.
NOTE: Max Connections is the number of separate connections per
initiator on the target iSCSI Volume. This is useful when setting MPIO
on iSCSI initiator.