Niveo Professional NNAS-R4 - Manual (Page 94)

NAS System
94 User Manual
4. In Windows screen, check the “Enable Domain Authentication” option. Configure the
necessary options.
a. If Domain Server IP is automatically detected, the Domain Server IP will be
displayed. If you want to join NAS to a specific Domain Server IP, remove the
check mark in “Auto Detect Domain IP” and manually enter the Domain
Server IP address.
b. Enter the Domain Administrator account.
c. Enter the Domain Administrator’s password.
d. Select the PDC/ADS mode.
Windows Domain Authentication Options:
Enable Domain Authentication – Use this option to enable or disable
Windows Domain Authentication.
Host Name – Indicates the NetBIOS name of NAS as configured in Network
 Device Configuration tab.
Domain/Workgroup – Shows the domain/workgroup name as configured in
Network  Device Configuration tab.
DNS Suffix – Shows the DNS Suffix as configured in Network  Device
Configuration tab.
Domain Server IP – Shows the IP address of the domain server which is
automatically detected when “Auto Detect Domain IP” option is
enabled. If “Auto Detect Domain IP” option is disabled, manually type
the domain server IP address.
Logon Administrator – Enter the administrator’s logon account in the
domain server.
Password – Enter the password of administrator’s logon account in the
domain server.