PLANET SGSW-24040 - Manual (Page 187)

User’s Manual of SGSW-24040 / 24240 Series
187
4.9.2.4 Set up VLAN Tag Priority Mapping
Set up the traffic class mapping to the User Priority value (3 bits) when receiving VLAN tagged packets.
The Set up VLAN Tag Priority Mapping screen in Figure 4-9-6 appears.
Figure 4-9-6 Set up VLAN Tag Priority Mapping page screenshot
The page includes the following fields:
Object Description
•
QCL ID Select the QCL ID to which this QCE applies.
•
VLAN Priority Class Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
Buttons
: Click to cancel the wizard.
: Click to go back to the previous wizard step.
: Click to continue the wizard.
The QCL configuration wizard is finished, and the new configuration is ready for use.