PLANET SGSW-24040 - Manual (Page 27)

User’s Manual of SGSW-24040 / 24240 Series
27
SGSW-24040R: 3.1kg
LED Power, Link/Act and speed per Gigabit port
Power Consumption Max. 30.2 watts / 102.98 BTU
Power Requirement – AC AC 100~240V, 50/60Hz AC 100~240V, 50/60Hz
Power Requirement – DC ---
-48V DC @ 0.6A
Range: -30 ~ -60V
Stacking Numbers 16
Stacking Bandwidth 10Gbps Full-Duplex
Stack ID Display 7-Segment LED Display (1~9, A~F,0)
ESD Protection 6KV DC
Layer 2 Function
Basic Management Interfaces Console, Telnet, Web Browser, SNMPv1, v2c and v3
Secure Management Interface SSH, SSL, SNMP v3
Port configuration
Port disable/enable.
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection.
Flow Control disable / enable.
Bandwidth control on each port.
Power saving mode control
Port Status
Display each port’s speed duplex mode, link status, Flow control status.
Auto negotiation status, trunk status.
VLAN
802.1Q Tagged Based VLAN ,up to 255 VLAN groups
Q-in-Q
Private VLAN
Voice VLAN
Port trunking
IEEE 802.3ad LACP / Static Trunk
Support 12 groups of 16-Port trunk support
QoS
Traffic classification based, Strict priority and WRR
4-level priority for switching
- Port Number
- 802.1p priority
- DS/TOS field in IP Packet
IGMP Snooping
IGMP (v1/v2) Snooping, up to 255 multicast Groups
IGMP Querier mode support
Access Control List
IP-Based ACL / MAC-Based ACL
Up to 256 entries
SNMP MIBs
RFC-1213 MIB-II
IF-MIB