PLANET SGSW-24040 User Manual

Page 313

Advertising
background image

User’s Manual of SGSW-24040 / 24240 Series

313

Object

Description

System PoE Admin

Mode

Allows user enable or disable PoE function. It will causes all of PoE ports supply

or not supply power.

Power Management

Mode

There are five modes for configuring how the ports/PDs may reserve power and

when to shut down ports.

Classification mode

Allocation mode

Consumption mode

Priority mode

The default PoE management mode is “Consumption mode”.

Power Supply Budget

[W]

Set limit value of the total PoE port provided power to the PDs.

For SGSW-24040P, the available max. value is 220, for SGSW-24040P4, the

available max. value is 380, and for SGSW-24040HP, the available max. value is

360.

Temperature

Threshold

Allows setting over temperature protection threshold value. It system

temperature was over it then system lower total PoE power budget automatically.

PoE Usage Threshold

Allows setting how much PoE power budget could be limited.

Buttons

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

For SGSW-24040P, the total PoE power reservation from Port-1~24 is up to 220W

For SGSW-24040P4, the total PoE power reservation from Port-1~24 is up to 380W

For SGSW-24040HP, the total PoE power reservation from Port-1~24 is up to 360W

PD Classifications

A PD may be classified by the PSE based on the classification information provided by the PD. The intent of PD classification is

to provide information about the maximum power required by the PD during operation. Class 0 is the default for PDs. However,

to improve power management at the PSE, the PD may opt to provide a signature for Class 1 to 4.

The PD is classified based on power. The classification of the PD is the maximum power that the PD will draw across all input

voltages and operational modes.

A PD shall return Class 0 to 4 in accordance with the maximum power draw as specified by

Table 4-16-1.

Class

Usage

Range of maximum power used by the PD

Class Dsecription

0

Default

0.44 to 12.95 Watts

Classification unimplement

1

Optional

0.44 to 3.84 Watts

Very low power

Advertising
This manual is related to the following products: