Rainbow Electronics W90P710CDG User Manual
Page 198
W90P710CD/W90P710CDG
- 198 -
BITS
DESCRIPTIONS
[31:16]
Reserved
[15] RUM_CLKI
Interrupt enable for RESUME (for clock is stopped)
0: Disable
1: Enable
[14]
RST_ENDI
Interrupt enable for USB reset end
0: Disable
1: Enable
[13] USB_CGI
Interrupt Enable for Device Configured
0: Disable
1: Enable
Note: the interrupt occurs when device configured or dis-configured.
[12] USB_BTI
Interrupt Enable for USB Bus Transition
0: Disable
1: Enable
[11] CVSI
Interrupt Enable Control for Status Phase of Class or Vendor Command
0: Disable
1: Enable
[10] CDII
Interrupt Enable Control for Data-In of Class or Vendor Command
0: Disable
1: Enable
[9] CDOI
Interrupt Enable Control for Data-Out of Class or Vendor Command
0: Disable
1: Enable
[8] VENI
Interrupt Enable Control for USB Vendor Command
0: Disable
1: Enable
[7] CLAI
Interrupt Enable Control for USB Class Command
0: Disable
1: Enable
[6] GSTRI
Interrupt Enable Control for USB Get_String_Descriptor Command
0: Disable
1: Enable