Rainbow Electronics W90P710CDG User Manual
Page 423
Advertising
W90P710CD/W90P710CDG
Publication Release Date: September 19, 2006
- 423 -
Revision B2
BITS
DESCRIPTION
[31:2] RESERVED
-
[1]
INT5
Interrupt 5 status
When interrupt input is detected with ISTYPE5 triggered condition, this
flag will be set. It must be cleared by software.
1 = interrupt detected.
0 = No interrupt
[0]
INT4
Interrupt 4 status
When interrupt input is detected with ISTYPE4 triggered condition, this
flag will be set. It must be cleared by software.
1 = interrupt 4 is detected.
0 = no interrupt
Advertising