B&B Electronics ADAM-6066 - Manual - Manual (Page 108)

ADAM-6000 Series User Manual 98
Figure 5.24: Copy One Setting to Other Channels
Choose the channel which provides the setting for other channels by the
Channel combo box at the top of the dialog window. Then select chan-
nels which you want to copy setting to by clicking the Channel check
box in the Copy to area. Using Figure 5.24 as an example, setting of
channel 0 will copy to channel 1, 2, and 3. If you want to copy the setting
to all channels, click the Select all check box. After selecting the chan-
nels, click the Config button. Then you will find the setting of the chan-
nels you selected has been copied in the mapping table. After that, you
can individually select the channel needed to modify and change the
parameters. Therefore, you don’t need to do all the configurations and
you can concentrate on setting on the parameters needed to be modified.
• Peer-to-Peer Data Transfer Performance
1. Wired LAN Module
Condition: transfer data from one channel of an ADAM-6050 module to
one channel of another ADAM-6050 module, via one Ethernet switch.
Data Transfer Time: < 1.2 millisecond
2. Wireless LAN Module
Condition: transfer data from one channel of one ADAM-6050W module,
to one channel of another ADAM-6050W module, using Ad hoc mode
Data Transfer Time: < 30 millisecond