B&B Electronics ADAM-6066 - Manual - Manual (Page 74)

ADAM-6000 Series User Manual 64
Menus
The menus at the top of the operation window contain:
File Menu:
1.
Open Favorite Group - You can configure your favorite group and
save the configuration into one file. Using this option, you can load
your configuration file for favorite group.
2. Save Favorite Group - You can configure your favorite group and
save the configuration into one file. Using this option, you can save
your favorite group into one configuration file.
3. Auto-Initial Group - If you want to have the same favorite group
configuration when you exit ADAM.NET utility and launch it
again, you need to check this option.
4. Exit - Exit ADAM.NET Utility.
Tools Menu:
1.
Search - Search all the ADAM-6000 and ADAM-5000/TCP mod-
ules you connected. The operation process will be described in Sec-
tion 5.3.2.
2. Add Devices to Group - You can add ADAM-6000 modules to your
favorite group by this option. You need to select the device you
want to add in the Module Tree Display area (it will be described
below) first, and then select this option to add.
3. Terminal for Command Testing - ADAM-6000 modules support
ASCII command and Modbus/TCP as communication protocol.
You can launch the terminal to communicate with ADAM-6000
module by these two protocol directly. (Refer to Section 6.3 and 6.4
for more information about ASCII and Modbus/TCP command.)
4. DiagAnywhere Searcher - There are multiple Advantech products
installed with DiagAnywhere server, which gives user remote con-
trol ability through Ethernet. When you choose this option, all
devices with DiagAnywhere server in the Ethernet you connected
with will be listed.
5. Print Screen - You can save current ADAM.NET Utility screen into
an image file by this option.