B&B Electronics ADAM-6066 - Manual - Manual (Page 61)

51 Chapter 4
4.2.6 ADAM-6050W
18-ch Wireless Isolated Digital Input/Output Module
ADAM-6050W is a high-density I/O module with a IEEE 802.11b wire-
less LAN interface for seamless Ethernet connectivity. It provides 12 digi-
tal input and 6 digital output channels with 2000 VDC isolation
protection. All DI channels support input latch function for important sig-
nal handling. Meanwhile, the DI channels can be used as 3 kHz counter
and frequency input channels. In addition to the intelligent DI functions,
the digital output channels also support pulse output functionality.
ADAM-6050W Specifications
• Communication: IEEE 802.11b Wireless LAN
• Supports Protocol: Modbus/TCP, TCP/IP, UDP, HTTP, ICMP and ARP
• Supports Peer-to-Peer (Refer to Section 5.3.4)
Digital Input
• Channels: 12
• Dry Contact:
Logic level 0: Close to Ground
Logic level 1: Open
• Wet Contact:
Logic level 0: 0 ~ 3 VDC
Logic level 1: 10 ~ 30 VDC
• Support 3 kHz counter input (32-bit + 1-bit)
• Support 3 kHz frequency input
• Support inverted DI status
Digital Output
• Channels: 6
• Sink type: Open Collector to 30 V, 100 mA (maximum load)
• Supports 5 kHz pulse output
• Supports high-to-low and low-to-high delay output