Figure 7.9: the next logic rule, 4 output stage, Figure 7.9:the next logic rule – B&B Electronics ADAM-6066 - Manual User Manual
Page 196: Output stage
ADAM-6000 Series User Manual
186
If you click the next logic rule icon, you will find one of the input condi-
tion become previous logic rule. Refer to Figure 7.9. Therefore, the logic
result value from the previous logic rule (in this example, logic rule 1)
will be one of logic input value of current logic rule (in this example,
logic rule 2). This makes the two neighbor logic rules combined together.
We call it Logic Cascade. Using this method for Logic Cascade, only the
two neighbor logic rules can be combined together. If you want to com-
bine two logic rules that are not next to each other, you need to use inter-
nal flag. Please refer to Section 7.4.1.
Figure 7.9: The Next Logic Rule
7.3.4 Output Stage
When you click the Output stage icon, you should see a dialog window
similar to Figure 7.10 below. There are three outputs for one logic rule.
The logic result value from the Execution stage will be passed to the three
outputs. And the three outputs will have different action depend on the
logic result value.