B&B Electronics ADAM-6066 - Manual - Manual (Page 93)

83 Chapter 5
When the communication between host PC and ADAM-6000 digital
modules is broken, the digital output channel can generate a predefined
value (this value is called fail safe value). You can enable or disable this
function by click the Turn on WDT checked channel when WDT trig-
gered check box. You can define the fail safe value by the WDT check
box next to the DO status LED. After configure related setting, click the
Apply WDT button. Take Figure 5.13 below as example. The fail safe
value function is enabled. If the communication between ADAM-6000
digital module and host PC is broken, channels 0 and 2 will automatically
generate logic high value, while channels 1, 3, 4, 5 will automatically
generate logic low value.
Figure 5.13: Fail Safe Value Configuration
2. Modbus
You can see current digital input or digital output values for all related
Modbus address.
Individual Channel Configuration
You can see digital input value and configure setting for each digital input
channel. It is the same that you can control the digital output value and
configure setting for each digital output channel. Simply click the channel
interested in the Individual Channel Configuration items.
If you choose a digital input channel, the Status Display area should look
similar to Figure 5.14 below.