B&B Electronics ADAM-6066 - Manual - Manual (Page 191)

181 Chapter 7
Local Digital Output Channel (DO)
After you choose DO as input mode, select the channel by the Channel
combo box. The value of the selected digital output channel will directly
be the input of condition. If you choose True in the Condition combo
box, it means only when the value of the selected DO channel equals to
logic True, the condition result is logic True. If you choose False in the
Condition combo box, only when the value of the selected DO channel
equals to logic False, the condition result is logic True.
Internal Counter (Counter)
There are 8 internal counters on ADAM-6000 module, you can read its
value as input condition. After you choose Counter as input mode, select
the counter index by the Channel combo box. (From counter 0 to counter
7). The count value of the selected internal counter will directly be the
input of condition. Like the Frequency Input condition, select the appro-
priate condition for that counter by the Condition combo box and the
Value text box. The condition will compare the value read from the inter-
nal counter and the value set by the Value text box. If condition is satis-
fied, the condition result is logic True. Otherwise, the condition result is
logic False.
Note: You can use other program applications to read or write
internal flags through ASCII command or Modbus/TCP
address. Refer to section 6.4.2 and Appendix B.2.