B&B Electronics ADAM-6066 - Manual - Manual (Page 80)

ADAM-6000 Series User Manual 70
Password
In this tab, you can set up password for selected ADAM-6000 module.
You need to type current password in the Old password text box, and the
new password in the New password and Verify password text box.
There will be many configuration and operation action asking user to type
password, so this can help to ensure safety.
Note: The default password is 00000000
Firmware
Advantech will continuously release new version of firmware to add or
improve functionality of ADAM-6000 modules. You can connect to the
Advantech website (http://www.advantech.com) to download the latest
version of firmware. There should be three files with different file exten-
sion: .bin, .html and .jar. The file with .bin extension is the firmware
itself. And the two files with .html and .jar extension are for the Web
Server on the ADAM-6000 module. In this tab, you can upgrade the
downloaded firmware to your ADAM-6000 module. Click the Open but-
ton to load the three firmware files from your computer. Then click
Upgrade button to download the firmware to the ADAM-6000 module.
Peer-to-Peer /Event
You can enable and configure Peer-to-Peer (Event) function in this tab.
For more detail about Peer-to-Peer (Event) function, refer to section
5.3.4.
Note: When you update a new firmware to your module, some
of the configurations for the 8 tabs in the Status Display
area may be changed. We suggest you to confirm the
configurations again.
Note: ADAM-6024 doesn't support webpage upgrade
(.html and .jar file).