B&B Electronics ADAM-6066 - Manual - Manual (Page 41)

31 Chapter 4
Figure 4.7: ADAM-6018 Digital Output Wiring
Assigning Addresses for ADAM-6018 Modules
Based on the Modbus/TCP standard, the addresses of the I/O channels in
ADAM-6000 modules you place in the system are defined by a simple
rule. Please refer to Appendix B.2.3 to map the I/O address.
4.1.4 ADAM-6024
12-ch Isolated Universal Input/Output Module
The ADAM-6024 is a 12-channel Universal Input/Output module. There
are 6 analog input, 2 analog output, 2 digital input and 2 digital output
channels. The analog input channels is 16-bit, universal signal accepted
design. It provides programmable input ranges on all channels. It accepts
various analog inputs +/-10V, 0~20mA and 4~20mA. The analog output
channel is 12 bit with 0~10V, 0~20mA and 4~20mA acceptable input
type. Each analog channel is allowed to configure an individual range for
several applications.