Figure 5.5: channels range configuration area, Figure 5.5:channels range configuration area – B&B Electronics ADAM-6066 - Manual User Manual
Page 83
73
Chapter 5
If you click the All Channel Configuration item, you can read analog
input value or configure setting for all channels on the Status Display
area. If you click the Individual Channel Configuration item, you can
read AI values or configure setting for the specific channel you choose.
Below, we will describe the All Channel Configuration and Individual
Channel Configuration in more detail for ADAM-6000 I/O modules.
• Analog Input Module (ADAM-6015, ADAM-6017 and ADAM-6018)
All Channel Configuration
For these ADAM-6000 modules, when you click the All Channel Con-
figuration item in the Module Tree Display area, there will be four parts
on the Status Display area. In the top left-hand corner is the Channels
Range Configuration area. You can set different range for each channel.
In the Channels Range Configuration area, select the channel number
in the Channel index combo box, and then select the range in the Input
range combo box. After selecting appropriate range, click the Apply but-
ton. Refer to Figure 5.5 below.
Figure 5.5: Channels Range Configuration Area