B&B Electronics ADAM-6066 - Manual - Manual (Page 199)

189 Chapter 7
Digital Output (DO)
Below are the steps to configure digital output:
1.
Choose correct model name by the Target module combo box in
the Operation area. If the Destination is Local, you don't need to
choose the model name.
2. Define to generate True or False digital output signal for the true
action (When the logic result value passed from Execution stage is
logic True) by the True Action combo box.
3. The false action (When the logic result value passed from Execu-
tion stage is logic False) is displayed from the False Action text
box and will automatically be set according to the true action. The
false action will be opposite to the true action. For example, when
you choose False in the True Action combo box, the False Action
text box will automatically display True.
4. Define which channel is responsible to generate output signal on
the target device by the Channel combo box.
5. Click the OK button to complete the configuration.
Counter Channel Setting (DI_Counter)
Below are the steps to configure counter channel setting:
1.
Choose correct model name by the Target module combo box in
the Operation area. If the Destination is Local, you don't need to
choose the model name.
2. Define what action (start the counter by Start, or stop the counter
by Stop, or reset the counter by Reset) will be taken for the true
action (When the logic result value passed from Execution stage is
logic True) by the True Action combo box.
3. The false action (When the logic result value passed from Execu-
tion stage is logic False) is displayed by the False Action text box
and will automatically be set according to the true action. Define
which counter channel is responsible to take the defined action by
the Channel combo box.
4. Click the OK button to complete the configuration.