GE Industrial Solutions H5692448 Power Systems Infinity M1 (NE-M) - Manual (Page 40)

NE-M Installation Guide H5692448
CC848815325 r06 May 2013 40
Step Action – Pulsar Plus
1
Attach an ESD wrist strap or equivalent to the ESD grounding connector on right hand side of the inside of the
frame.
Figure 59 ESD Grounding Connector
2
Locate configuration jumpers for alarm relays on the controller.
Jumpers for each of the 10 output alarms are visible on the board of the door-mounted controller.
Figure 60 Alarm Relay Jumpers – Pulsar Plus
ESD Grounding Connector
Alarm Relay Jumpers