GE Industrial Solutions H5692448 Power Systems Infinity M1 (NE-M) - Manual (Page 57)

NE-M Installation Guide H5692448
CC848815325 r06 May 2013 57
Step
Configuration Attribute
to Change
Menu Path/Action - Pulsar
Format This field allows you to select one of the following time display formats: 12 or
24 hour. Use the <+> or <-> key to select the desired format and press
<ENTER> to save the change.
Time Allows you to change/set the time.
3
Daylight Enables or Disables Daylight Savings per the new standards created by the
Energy Policy Act of 2001 . (Started in 2007.)
Batteries
4
Type The configuration of this field selects the battery type, Flooded or Valve
Regulated (sealed). This parameter is used in reserve time prediction and
enhanced battery test features. Move the cursor to the field and use the <+> or
<-> key to adjust the threshold value. Press <ENTER> to save the change.
5
Confirm Equipment
Installed
Use the STATUS menu to confirm the equipment installed:
Rectifiers: Menu > Status > Rectifiers
Distribution Modules: Menu > Status > Shunt Currents
Thermal Probes: Menu > Status > Batteries
Configuration Shunt Monitors
Batteries Type
Status Rectifiers
Batteries
Rectifier
Currents
Shunt Currents