GE Industrial Solutions H5692448 Power Systems Infinity M1 (NE-M) - Manual (Page 46)

NE-M Installation Guide H5692448
CC848815325 r06 May 2013 46
Step Action – Pulsar Plus
6
Telephone Line Connection (Optional).
Door-mount MODEM option provide their own RJ11
connection for the telephone line.
Use appropriate routing techniques to connect the
controller respective RJ11 to the telephone line.
Modem is mounted on door above the controller.
7
Local RS232 Serial Port Connector
Connect notebook computer, PC or external modem to
RS232 port.
The Local RS232 and future Craft Ethernet connectors
are located inside the door on the front of the controller.
RS-232 is DCE (Data Communication Equipment).
Figure 64 Local Port - Pulsar Plus
Install Millennium II
Note: The controller is factory installed connected to the NE-M equipment.
Connections to the controller made during installation are described here.
CAUTION: Equipment Damage
ESD NOTE: You must protect against ESD prior to configuring and installing the following circuit
cards.
1
Attach an ESD wrist strap or equivalent to the ESD grounding connector on right hand side of the inside of the
frame.
Figure 65 ESD Grounding Connector
Install Circuit Cards
CAUTION: Equipment Damage
ESD NOTE: You must protect against ESD prior to configuring and installing the following circuit
cards.
RS-232
ESD Grounding Connector