Figure 71 open rectifier door, Figure 72 close rectifier door, Figure 73 open rectifier door – GE Industrial Solutions H5692448 Power Systems Infinity M1 (NE-M) User Manual
Page 51: Figure 74 remove rectifier
Advertising
NE-M
Installation Guide
H5692448
CC848815325 r06 May 2013
51
Step
Action
5
Open the faceplate by sliding the black latch to the left to
release the faceplate.
Figure 71 Open Rectifier Door
6
Push the unit firmly into the shelf until seated.
7
Install an air filter by placing it inside the faceplate.
8
Swing the faceplate closed until it is secured by the latch.
Figure 72 Close Rectifier Door
9
Verify green LED and only green LED is on.
If this isn’t the case, see the Troubleshooting section.
Rectifier/Converter Removal Procedure
Step
Action
1
Open the faceplate to disengage the rectifier/converter.
Figure 73 Open Rectifier Door
2
Remove the unit from the shelf.
Figure 74 Remove Rectifier
Advertising