Burkert Type 8620 - Manual (Page 143)

mxCONTROL Type 8620
Page 143
The alarm and warning limits for inputs can be changed in the configuration menu in the menu of the
desired input.
The alarm and warning limits for oxygen (module O2_SCAV_CTRL_RATIO) can be set in the
"Parameter" main menu in the submenu belonging to the module.
Configuration (Code Level: Specialist)
Configuration Access
via Cfg.-
menu Access
via XML-
Cfg.-File Abbrevi
ation
(menu) Value range Default values
(after factory reset or
at start of Cfg-File-
Download)
Alarm output function rw rw Output enable/disable disable
Output used for alarm
output r rw Alarm
output
depending on
configured and
activated outputs and
adapted options:
Relay 1 … Relay 5,
4…20mA output 1 …
4…20mA output 4,
Transistor 1 …
Transistor 4,
Not output No Output
The output used as alarm output has to be a configured and enabled output, which is not used
concurrently as output of another module.
The yellow LED indicates also in case of disabled alarm output function that an alarm occurs.
•