Burkert Type 8620 - Manual (Page 50)

mxCONTROL Type 8620
Page 50
Email 1 – Alarm renotification Email 2 – Warning renotification
Remote device access via PC-Tool
Requirements
• Access to the local Ethernet network, in which the device “Type 8620 mxCONTROL” is
located
• Network safety regulations allow traffic on TCP/IP port 10001
• IP address of “Type 8620 mxCONTROL” is known
• Unique DHCP host name of “Type 8620 mxCONTROL” is known (if Static IP = No)
Functionality
Please refer to chapter 11.5.3 (Remote) Device access via PC-Tool.