Burkert Type 8620 - Manual (Page 41)

mxCONTROL Type 8620
Page 41
Parameter (CodeLevel: Operator)
Parameter Access via
Datalog-
menu Access via
XML-
Param.-File Abbre-
viation
(menu) Range Default values
(after factory reset or at
start of Param-File-
Download)
Datalog Logging SD-Card rw -- -- enable/disable Disable (only after
factory reset)
Sample Time rw rw Tsample 10 ... 99999sec 3600sec (*)
Logfile
Current log file name r -- Current -- --
Increase log file index by
one (Creates new log file) w -- New
Logfile
-- --
Automatic log file size
limitation rw rw FSizeLimit Yes / No No
Max. log file size rw rw FSizeMax 0.1 … 100.0 MB 1.0 MB
(*) Default value also after successful download of Cfg-File
Configuration (CodeLevel: Specialist)
Configuration Access
via
Datalog-
menu Access
via XML-
Cfg.-File Abbrevia-
tion
(menu) Value range Default values
(after factory reset or
at start of Cfg-File-
Download)
Log File
Log file index (**)
rw -- LFI 1 … 65535 1 (only after factory
reset)
EventLog
Event Log function
rw rw EventLog On, Off On
Log Events (*)
Alarms
rw rw Alarms On, Off On
Important error messages rw rw ErrorMsg On, Off On
Switching Operational
Mode rw rw OpMode On, Off On
Switching of On/Off
outputs rw rw O/O outputs On, Off On
Communication events /
errors rw rw Comm On, Off On
Miscellaneous rw rw Misc On, Off On
(*) Only displayed, if Event Log function was set to On.
(**) Only displayed, if Datalogging was disabled