Burkert Type 8620 - Manual (Page 44)

mxCONTROL Type 8620
Page 44
Changing sample time:
→ Select
„Tsample“ , press key “INPUT”
→ Input a new value for „Tsample“ (via keys „+“ und „<-“), press key „OK“
New settings of Tsample apply when returning to the main menu!
→ „ESC“ cancels the function of setting a new value for Tsample,
the new value for Tsample will not be applied.
→ Leave the submenu by pressing key “EXIT”.
11.3.3 Stop of Data Logging (disabling)
To disable the Data Logging function proceed as stated below.
→ Scroll in the main menu to the menu item “Data Logging” (via “arrow” keys),
press key “ENTER”.
→ Enter the operator or specialist password (via keys „+“ and „<-“)
→ Select „Disable“ of Data Logging, press key "SELEC"
The Data Logging function is deactivated immediately!
The symbol top left on the display vanishes.
→ Leave the submenu by pressing key “EXIT”.
Remove the SD card for processing of the file on a PC.
Do not remove the SD card if the Data Logging function is active!
Otherwise the logged data could be lost and the directory structure of the SD card could be
damaged up to a non-readability of the SD card.
When changing the SD card the Data Logging has to be enabled again (notice the symbol
top left on display).