Burkert Type 8620 - Manual (Page 173)

mxCONTROL Type 8620
Page 173
21.5.6 Up-/Download - Download
Config-File
Download
EXIT SD-Card
......
EXIT: Cancel
File found
Download
EXIT SD-Card
....
EXIT: Cancel
Download
EXIT SD-Card
Successful.
File found
Download
EXIT SD-Card
No Permission.
EXIT: Cancel
Download
EXIT SD-Card
Failed.
ENTER
if Config-File detected
Download successful
During download
of Config-File
Download
failed
The file is scanned,
but data are not
applied.
EXIT
EXIT
to 5-2-2
- Download is cancelled
- Old configuration and
parameterisation is restored
to 5-2-2
Current Code level
has no permission to
download this file
(here: Config-File)
ENTER
EXIT
EXIT
Sample Projects
Select File
USB_Driver
EXIT ENTER 5-2-3
Select File
EXIT ENTER 5-2-2
Project ABC
Project DEF
Project GHI
... ...
..
Select File
EXIT ENTER 5-2-2
BW_06T_v1.cfg
BW_06T_v1.par
===================
ENTER ..
ENTER
from
to
Item
5-2
ENTER
EXIT
Use the Arrow-Up-/Down-Softkeys
for scrolling through the list.
... ...
... ...
SD-Card - Select File
marks a folder.
SD-Card - Select File
-folders, and only .par, .cfg, .xml and .txt-files are displayed
- max. 15 entries (files / folders) of a folder are displayed
+ ENTER-Softkey
returns to the parent folder ..
FileName.cfg + ENTER-Softkey
starts download of selected file
(xxx.cfg – configuration file or
xxx.par – parameter file)
... ...
To download a new project
start with the xxx.cfg-file!
If the device is not in Manual
Mode yet, it will be switched
to Manual Mode during the
download process.
!
ENTER-Softkey starts Download,,
if file was selected with cursor bar.
Parameter
BW 06T
Configuration
System settings
Up-/Download
ENTER 5
EXIT
from Item
6
to Item
6
Code-Protection:
Operator-/Specialist-
Level (*/**)
to Item
4
from Item
4
ENTER
(*/**)
EXIT
ENTER to
Item 5-2-2
from
from Item
5-3
to Item
5-3
A
A
C
C
B
B
B
B
ENTER
Message (e.g. „No Permission“)
has to be acknowledged with „OK“.
+ ENTER-Softkey
enters the project folder Project Name
FileName.par
!
----- SD-Card -----
Up-/Download
Not possible
Data Logging
EXIT ENTER 5-4
is active
No Up-/Download processes on SD-
Card are possible during active Data
Logging.
If Data Logging is active the following
screen appears:
!
Up-/Download processes on SD-Card
are only possible if Data Logging is
disabled. ----- SD-Card -----
Up-/Download
Download
Upload
EXIT ENTER 5-2
===================
Select File
EXIT ENTER 5-2-B
Project MNO
Project UVW
Project XYZ
BW06T
..
Select File
EXIT ENTER 5-2-3
BW_06T_v1.cfg
BW_06T_v1.par
===================
Sample Projects
Select File
USB_Driver
EXIT ENTER 5-2-2