Burkert Type 8620 - Manual (Page 17)

mxCONTROL Type 8620
Page 17
6 Technical Data
6.1 Technical Specifications
These operating instructions are valid from Firmware revision: C.00.00.00
General Details of the Device
Enclosure with sealed keypad and display
Enclosure outer dimensions L x W x H 230 x 204 x 119 mm (without cable glands)
Enclosure material PC (UL94) with transparent door and key
Weight 1.8 kg
Degree of protection IP 65 and NEMA/UL 50, Type No. 4X, with door closed and
properly sealed cable glands,
additional cover of USB port and SD card slot
Graphic display, large and backlighted 128 x 64 dots, two colored (blue and white)
Keypads for manual operation 5 keys for user inputs
Operating temperature 0 … +50 °C
Storage temperature -20 … +60 °C
Electrical Details
Mains voltage (power supply) 100 … 240 V AC, 50/60 Hz, no adjustment necessary
Power consumption (of mxCONTROL device) max. 35 W (incl. sensor supply at Instrumentation Supply part)
Total power consumption
(using the internal power distribution) max. 2400 W (at 240 V AC) or max. 1100 W (at 110 V AC)
incl. connected actuators at Power Supply part
Total input current I
in
(using internal power distr.) max. 10 A
Total output current I
out
(using the internal power distribution)
<10 A (incl. device power consumption of 35 W)
Instrumentation supply for sensors / transistor
outputs 24 V DC (±5 %), max. 1.04 A (25 W),
short circuit and overload protected
Fuse for device protection
(Instrumentation) internal: electronic fuse, recovers automatically after fault
condition is removed
Fuse for Relays outputs Relay outputs to be fused in external installation according to
actuators
Inrush current (typ.) Cold start: 30 A / 230 V AC
Electrical Connections
Electrical connection Power Supply Hardware version 1: Screw terminals, grid 5.08 mm,
for wire gauges 0.14 … 1.5/2.5 mm 2 (AWG 26…14)
Hardware version 2: Spring type terminal, grid 5.0 mm,
for wire gauges 0.2 … 2.5/4.0 mm 2 (AWG 24…12)
Electrical connection Instrumentation Supply Hardware version 1: Screw terminals, grid 3.81 mm,
for wire gauges 0.14 … 1.0/1.5 mm 2 (AWG 26…16)
Hardware version 2: Spring type terminal, grid 3.5 mm,
for wire gauges 0.2 … 1.5 mm 2 (AWG 24…16)
Hardware version 1:
9 x M16 (PG9) 5 ... 6.5 mm cable
1 x M32 (PG21) 5 mm cable (5x)
Hardware version 2:
4 x M16 (PG9) 5 ... 6.5 mm cable
2 x M16 (PG9) 6 ... 9.5 mm cable
3 x M20 (PG13) 9 ... 13.5 mm cable
1 x M32 (PG21) 5 mm cable (5x)
(cable = outer diameter of cable)
Not used cable glands have to be sealed with appropriate
sealing bolts to guarantee the Degree of protection IP65.
Cable glands and cables
Thermal stability (cable material):
105 °C for cables at Power Supply part
80 °C for cables at Instrumentation Supply part