Burkert Type 8620 - Manual (Page 7)

mxCONTROL Type 8620
Page 7
2 Intended Use
WARNING!
Hazards to persons, equipment in the vicinity and the environment may result when not using
the „Type 8620 mxCONTROL“ as intended.
The „Type 8620 mxCONTROL“ may not be used in explosion-hazard rooms.
The „Type 8620 mxCONTROL“ may only be used at temperatures from 0 °C.
The permissible data and operating conditions specified in the operating instructions as well
as the application areas described in chapter 6.1 must be followed. The customer is respon-
sible for choosing the device suitable for his application.
Proper transport, proper storage and installation as well as careful operation and service are
the prerequisites for safe and flawless operation.
Use the „Type 8620 mxCONTROL“ only as intended.
The „Type 8620 mxCONTROL“ is a multifunction controller. This multifunction controller was
developed to automate the control and process variables in a water treatment system (e.g.
boiler, cooling tower or Reverse Osmosis system).
Sophisticated electronics and state of the art control algorithms ensure that optimum process control is
maintained at all times, with minimal operator intervention.
Depending on the hardware version, the „Type 8620 mxCONTROL“ is capable of processing several
analog and digital inputs as well as several relay, transistor and analog outputs at the same time.
Combined with an easy to read display in three languages: English, German and French (other
languages on request), the device offers nearly unlimited options for process automation systems.
The „Type 8620 mxCONTROL“ functions are highly software-based. All configuration and
parameter files
can be created in a quick and unsophisticated manner with the help of a PC Tool
and downloaded in the „Type 8620 mxCONTROL“ via SD card or USB. Alternatively, the optional
Ethernet interface can be used to configure and parameterize the device. The operator can then enter
and display all important variables and parameters using five soft-touch keys.
The „Type 8620 mxCONTROL“ is supplied with an SD card containing not only the configuration and
parameter files but also the operating instructions.
Three authorization levels (code level) allow for the safe operation of the „Type 8620 mxCONTROL“:
Open access, access only for instructed operators, access for specialists.
2.1 Restrictions
Note possibly existing restrictions when exporting the device.
2.2 Anticipated misuse
• The „Type 8620 mxCONTROL“ may not be used in explosion-hazard areas!
• Do not put mechanical stress on the unit (e.g. by storing heavy objects on it or using it as a
step).