Burkert Type 8620 - Manual (Page 49)

mxCONTROL Type 8620
Page 49
Up to 4 emails can be sent with one server connection. There is a 5 second mail server reconnection
delay, in order to enable external device access in worse case of continuous new trigger events. The
reconnection delay is set to 30 sec / 10 sec in case of failed mail server connection / communication.
If a connection to the mail server was delayed or failed the latest event information is kept and
updated in a volatile memory – for a later reconnection. Refer to the following table for details.
Email type In case of failed / delayed connect to the mail server - stored for a reconnect
Email 1 - Last 5 alarms
- Information, which former alarms occured at least once since last transmitted email 1
Email 2 - Last 5 warnings
- Information, which former warnings occured at least once since last transmitted email 2
- Last 10 displayed important error messages
Email 3 - Device (re)start timestamp
Email examples
Email 1 – Alarm Email 2 – Warning/Error
Renotification
A renotification interval can be configured for email 1 and email 2.
If at least one of the alarms (email 1) or warnings (email 2) is still active and the corresponding
renotifcation timer expires, the corresponding email is re-sent. A new trigger event resets the
corresponding renotification timer.
The email contains information on the device and an overview of current active alarms (email 1) or
warnings (email 2).