ARM Cortex R4F - Manual (Page 155)

System Control Coprocessor
ARM DDI 0363E Copyright © 2009 ARM Limited. All rights reserved. 4-71
ID013010 Non-Confidential, Unrestricted Access
Table 4-52 shows how the bit values correspond to the CFLR when it indicates a correctable
cache error.
Figure 4-54 shows the bit arrangement of the CFLR when it indicates a correctable TCM error.
Figure 4-54 Correctable Fault Location Register - TCM
Table 4-53 shows how the bit values correspond to the CFLR when it indicates a correctable
TCM error.
To access the Correctable Fault Location Register, read or write CP15 with:
MRC p15, 0, <Rd>, c15, c3, 0 : Read CFLR
MCR p15, 0, <Rd>, c15, c3, 0 : Write CFLR
Table 4-52 Correctable Fault Location Register - cache
Bits Field Function
[31:30] Reserved RAZ
[29:26] Way Indicates the Way of the error.
[25:24] Side Indicates the source of the error. For cache errors, this value is always 0b00 .
[23:14] Reserved RAZ
[13:5] Index Indicates the index of the location where the error occurred.
[4:2] Reserved RAZ
[1:0] Type Indicates the type of access that caused the error.
0b00 = Instruction cache.
0b01 = Data cache.
Type
31 26 25 24 23 22 3 2 1 0
Reserved Side Address[22:3]
Reserved Reserved
Table 4-53 Correctable Fault Location Register - TCM
Bits Field Function
[31:26] Reserved RAZ
[25:24] Side Indicates the source of the error.
0b01 = ATCM
0b10
= BTCM
[23] Reserved RAZ
[22:3] Address Indicates the address in the TCM where the error occurred.
[2] Reserved RAZ
[1:0] Type Indicates the type of access that caused the error.
0b00 = Instruction.
0b01
= Data.
0b10 , 0b11 = AXI slave.