HP Serveur lame HP ProLiant BL465c Gen8 User Manual
Page 189
• The subdirectory name must not contain a delimiter character (\).
• The subdirectory name must not be specified as only one period (.) or two periods (..).
• The root directory must not be specified.
Example of creating operation definition files (in a cluster configuration)
The following is an example of creating an operation definition file when the file server is a cluster
system. This example assumes the system configuration shown in
.
The following prerequisites apply to this example:
•
There are two file servers and a backup server to which a tape device is connected.
•
A virtual server
VServer_C
is running on the file server A (server name:
FSServer_A)
and the
file server B (server name:
FSServer_B
), which make up the cluster.
•
DRM_DB_PATH=
directory-name-on-shared-disk
;
virtual-server-name has been set in the Application
Agent configuration definition file (
init.conf
).
•
Application Agent is permitted to create a temporary directory for extended commands in the
dictionary map file directory.
•
In the disk containing the automatically created temporary directory for extended commands, there
is sufficient space to store the following temporary files:
• Backup ID record file
• Backup information file
•
When a temporary directory for extended commands is created according to the naming conven-
tions, the length of the directory name does not exceed the limit for the OS.
•
The IIS FTP service has been set up in the backup server (server name:
BKServer
) and is running.
The home directory of the FTP site is
C:\FTP_ROOT
.
•
The FTP subdirectory is
script
.
•
The file server A is specified as an active server and the file server B is specified as a standby
server. The shared disk
G:
is used.
•
The three mount points
D:
,
M:
, and
N:
exist on the file server A and file server B, the virtual
server C (server name:
VServer_C
) has been defined as a cluster resource.
•
The cluster resource in the following table has been registered in a cluster group
FSCG_1
.
Table 57 Cluster Resources (In cluster configuration when the backup is of a file system)
Mount point
Virtual server
Cluster group name
D:
VServer_C
FSCG_1
M:
,
N:
VServer_C
FSCG_1
•
The mount points
M:
and
N:
have been set in the mount point directory target definition file
app.txt
so that the mount point directories are operated at one time.
•
The storage directory for extended command temporary files is created on the file server A, the
file server B, and the backup server (server name:
BKServer)
(see the following table).
Application Agent CLI User Guide
189